MPE/iX System Utilities Reference Manual (32650-90882)

72 Chapter2
Utilities Quick Reference
SYSMAP
SYSMAP
Syntax
SYSDIAG
DUI> RUN SYSMAP
ENTER MAP>
Operation
Use SYSMAP to display the hardware configuration of a system. It displays the device type,
product number, logical device number (LDEV) and device address of I/O devices, and the
CPU and memory boards.
SYSMAP is part of the online diagnostics subsystem. To use SYSMAP, you start the diagnostic
subsystem by entering SYSDIAG and, at the DUI> prompt, enter the command RUN SYSMAP.
You then choose one of three basic map options:
• CPUMAP, to get information about the cpu
• MEMMAP, to get information about the size, location and other information about system
memory
• IOMAP, to get general I/O configuration information, information about a specific device
class, or information about devices on or below a specific physical address
Additional Discussion
For more information, refer to Chapter 26 , “SYSMAP,” and to the Precision Architecture:
HP 3000/9xx & HP 9000/8xx Online Diagnostics Subsystem Utilities Manual.