MPE/iX Intrinsics Reference Manual (32650-90875)

Chapter 8 425
Command Definitions (HPMERGEEND-LOGSTATUS)
HPRESETDUMP
HPRESETDUMP
NM callable only.
Disarms the system debugger call from a process abort.
Syntax
I32
HPRESETDUMP(
status );
Parameters
status 32-bit signed integer by reference (optional)
Returns the status of the HPRESETDUMP call. If no errors or warnings are
encountered,
status returns 32 bits of zero. If errors or warnings are
encountered,
status is interpreted as two 16-bit fields.
Bits (0:16) comprise
status.info . A negative value indicates an error
condition, and a positive value indicates a warning condition. Refer to the
MPE/iX Error Message Manual Volumes 1, 2 and 3 for a description of its
value.
Bits (16:16) comprise
status.subsys . The value represented by these bits
defines the subsystem that set the status information. The subsystem
identifier for HPRESETDUMP is 165.
Related Information
Intrinsics HPSETDUMP, SETDUMP, RESETDUMP
Commands RESETDUMP
Manual MPE/iX System Debug Reference Manual