MPE/iX Error Messages Manual Vol 3 (32650-90880)

94 Chapter3
Error Messages Viii C 3
MPE/iX Data Communications Buffer Manager
14 MESSAGE The virtual address of the source from which
data is to be copied is invalid.
15 MESSAGE The virtual address of the target to which
data is to be copied is invalid.
16 MESSAGE The length of the data to be copied from one
virtual address to another is invalid.
17 MESSAGE Access to the alias operation (used to copy
data from one point to another) is not
allowed.
18 MESSAGE The list of entries describing a PIN's
locality is full and can not be extended.
19 MESSAGE The LOCALITY ENTRY TABLE is out of entries.
76 MESSAGE An error occurred when changing from VPS to
KO.
73 MESSAGE The disk allocation suspension counter in the
TCB has gone below zero.
MPE/iX Data Communications Buffer Manager
(Subsystem 201)
3090 MESSAGE Illegal buffer ID passed to DCL Buffer
Manager procedure BMGR_FREE_BUFFER.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
MPE/iX Error Management
(Subsystem 187)
1 MESSAGE A system error STACK OVERFLOW occurred.
CAUSE Number of error entries to PUSH into the Process Error
Stack is greater than the Process Error Stack size.
ACTION Decrease the error entries or increase the Error Stack size.
2 MESSAGE A system error STACK UNDERFLOW occurred.