MPE/iX Error Messages Manual Vol 3 (32650-90880)

68 Chapter2
Error Messages Viii C 2
HPIO Channel Manager
detected a device locked during error
report/recovery.
230 MESSAGE The HPIB device adapter has detected the
failure of the DEVICE ADAPTER PROGRAM (DAP)
being downloaded.
244 MESSAGE The HPIB DAM has detected an ERROR when it
tries to get virtual quads for this I/O
request.
245 MESSAGE The HPIB DAM has detected an error when it
tries to get a message frame; IO_GET_FRAME
error.
246 MESSAGE The HPIB DAM has run out of its internal
software resources; FATAL internal error.
248 MESSAGE The HPIB DAM has detected an error from the
CAM when checking the I/O pointers.
249 MESSAGE The HPIB DAM has detected an error from the
CAM; CAM has no resources available.
250 MESSAGE The HPIB DAM has detected that the I/O
request has been aborted.
251 MESSAGE The CHANNEL ADAPTER MANAGER has returned an
error in the low level status.
252 MESSAGE The HPIB DAM has detected that the I/O
request has
been aborted.
253 MESSAGE The CHANNEL ADAPTER MANAGER has no resources
available.
254 MESSAGE The CHANNEL ADAPTER MANAGER has detected an
error in the I/O request
pointers.
HPIO Channel Manager
(Subsystem 114)
38 MESSAGE An I/O transaction completed with a non-zero
residue count. This is to be expected under
normal I/O conditions.
CAUSE DMA transferred fewer bytes than specified.
ACTION No action required.