MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 2 67
Error Messages Viii C 2
HPIB Adapter Manager
identify as an Advanced HPIB Device Adapter
Interface.
216 MESSAGE The HPIB device adapter failed its internal
self test.
217 MESSAGE The HPIB device adapter function can not be
done because PARALLEL POLL (PPOLL) interrupt
is enabled. It can be returned in response to
a setting of ATTENTION
(ATN) FALSE in the transaction.
218 MESSAGE The HPIB device adapter has detected that the
LOOPBACK functional test failed.
219 MESSAGE The HPIB device adapter outbound data is
frozen due to presence of inbound data on the
device adapter; it will not happen when the
device adapter is CONTROLLER-IN-CHARGE (CIC).
220 MESSAGE The HPIB device adapter has detected an
INTERFACE CLEAR (IFC) abort of data transfer.
221 MESSAGE The HPIB device adapter has detected an HPIB
DEVICE CLEAR (DCL).
222 MESSAGE The HPIB transaction requires device adapter
to be either addressed or not
CONTROLLER-IN-CHARGE (CIC). Presently, it is
NOT in either case.
223 MESSAGE The HPIB device adapter is
CONTROLLER-IN-CHARGE (CIC) and it should not
be.
224 MESSAGE The HPIB device adapter is not
CONTROLLER-IN-CHARGE and it should be.
225 MESSAGE The HPIB device adapter is not configured to
be a SYSTEM CONTROLLER (SC) and it should be.
226 MESSAGE The HPIB device adapter transaction function
code is either NOT implemented or NOT
supported.
227 MESSAGE The HPIB device adapter has detected that no
DEVICE ADAPTER PROGRAM (DAP) has been
downloaded. This error is given when an
execute downloaded DAP function is attempted
before the DAP has been previously
downloaded.
228 MESSAGE The HPIB current DEVICE ADAPTER PROGRAM (DAP)
is still in use.
229 MESSAGE The HPIB Device Adapter Program (DAP) has