MPE/iX Error Messages Manual Vol 3 (32650-90880)

66 Chapter2
Error Messages Viii C 2
HPIB Adapter Manager
161 MESSAGE The HPIB device adapter has detected a
timeout during a CS80 execution phase, and
the device adapter is no longer a
CONTROLLER-IN-CHARGE (CIC).
162 MESSAGE The HPIB device adapter has detected a
timeout during a CS80 execution phase.
163 MESSAGE The HPIB device adapter has detected a
timeout during a CS80 command phase, and it
has also detected a second timeout while
trying to send UNTALK or UNLISTEN commands.
164 MESSAGE The HPIB device adapter has detected a
timeout during a CS80 command phase, and it
is no longer a CONTROLLER-IN-CHARGE (CIC).
165 MESSAGE The HPIB device adapter has detected a
timeout during a CS80 command phase.
166 MESSAGE The HPIB device adapter has detected that the
data portion of the CS80 request block was
missing from the request phase.
192 MESSAGE The HPIB device adapter has detected a
timeout during a CS80 execution phase.
205 MESSAGE The HPIB device adapter has been set to a
different block size transferred. The block
size has to be reset first before setting to
a desired value. Other device(s) may be doing
the block size transferred.
206 MESSAGE The HPIB DAM has currently exceeded the
maximum number of the concurrent I/O
transactions. It can only support 8
concurrent I/Os at any one time.
210 MESSAGE The HPIB device adapter has detected that the
DEVICE ADAPTER PROGRAM (DAP) length exceeds
its maximum limit - DAP length greater than
512 bytes limit.
211 MESSAGE The HPIB device adapter has detected an
illegal DEVICE ADAPTER LANGUAGE (DAL) opcode.
212 MESSAGE The HPIB device adapter has detected a
DEAD-OR-DYING or PROTOCOL error.
213 MESSAGE The HPIB device adapter did not return any
hardware TSTATUS.
214 MESSAGE The HPIB device adapter has failed its
internal self test.
215 MESSAGE The HPIB device adapter has failed to