MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 2 61
Error Messages Viii C 2
High Level I/O
device.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
10 MESSAGE The message was not found in the input queue.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
11 MESSAGE The subqueue specified is used by the I/O
system.
CAUSE Same as for message Content.
ACTION Call your Hewlett-Packard Representative.
13 MESSAGE The I/O completion port must be ICS-sendable.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
14 MESSAGE The I/O completion port must be able to
handle the largest HLIO message.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
15 MESSAGE The I/O completion port must have 32
subqueues.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
17 MESSAGE The procedure can not be called from the ICS.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
18 MESSAGE The device is in a disabled state, and I/O
may not be performed to it.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
19 MESSAGE The data chain passed to SENDIO had unaligned
data.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.
20 MESSAGE The I/O request has generated more than the
maximum of 32 data chains.
CAUSE Internal error.
ACTION Call your Hewlett-Packard Representative.