MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 7 291
TurboIMAGE/XL V iii C 5
Utility Error Messages
MESSAGE LOGID MUST NOT BE LONGER THAN 8 CHARACTERS
CAUSE The logid name is too long.
ACTION Retype the correct logid to set into the database.
MESSAGE LOGID PASSWORD IS INCORRECT
CAUSE The password has been altered, or you are using the wrong password.
ACTION Set the logid with the correct password into the database.
MESSAGE LOGGING IS ENABLED, CAN NOT CLEAR LOGID
CAUSE The logid cannot be changed while logging is in process in order to ensure
validity of recovery and logging.
ACTION Change the logid after the recovery process has completed.
MESSAGE LOG PERIOD DOES NOT EQUAL ONE (1)
CAUSE Internal error.
ACTION Contact your system manager.
MESSAGE MAINTENANCE WORD CANNOT BE CHANGED UNTIL RECOVERY HAS
COMPLETED
CAUSE Changing maintenance word was attempted when recovery was enabled.
ACTION After the recovery process has completed use the DBUTIL>>SET
command to change the maintenance word.
MESSAGE MAINTENANCE WORD REQUIRED
CAUSE The user invoking the utility is not the creator of the referenced database
and has not supplied a maintenance word.
ACTION If DBUTIL, reenter the command with the maintenance word. Otherwise
correct the error or press return to terminate the program.
MESSAGE MAINTENANCE WORD TOO LONG
CAUSE The specified maintenance word has more than eight characters.
ACTION Reenter the command with the correct maintenance word.
MESSAGE MAXIMUM ERROR COUNT HAS BEEN EXCEEDED
CAUSE DBRecov keeps track of all the errors that were encountered. If the
number goes past a certain threshold (default is 0, but can be configured
up to a maximum of 3000), DBRecov will abort.
ACTION Correct the problems causing the errors. If the user specifies an error
count, this count could also be increased.
MESSAGE MAXIMUM WARNING COUNT HAS BEEN EXCEEDED
CAUSE DBRecov keeps track of all the warnings that were encountered. If the
number goes past a certain threshold, DBRecov will abort.
ACTION If the user specifies a warning count, this count could be increased.