MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 7 287
TurboIMAGE/XL V iii C 5
Utility Error Messages
MESSAGE INVALID ACCESS CLASS NUMBER
CAUSE The access class should be a number between 1 and 63.
ACTION Reenter with a valid access class number.
MESSAGE INVALID CHARACTER IN PASSWORD
CAUSE Password does not consist of allowed characters.
ACTION Check the password specified and reenter the command.
MESSAGE INVALID COMMAND
CAUSE Command is unknown to the utility.
ACTION Check spelling or see manual for legal commands.
MESSAGE INVALID CONTENTS OF ASCII ACCESS FILE ACTIVATION /
DEACTIVATION FAILED
CAUSE The file specified is either
1. Not a database-access file, or
2. It does not contain the valid format and parameters.
ACTION Either
1. Verify the correct database-access file, or
2. Use EDITOR to make the required changes and try accessing again.
MESSAGE INVALID DATA BASE CONTROL BLOCK
CAUSE TurboIMAGE/XL encountered an inconsistency in the control blocks.
ACTION Contact your system engineer.
MESSAGE INVALID DATA BASE ACCESS FILE NAME
CAUSE The file name or database name must be 1 to 6 characters starting with a
letter.
ACTION Reenter the command with the correct name.
MESSAGE INVALID DATA BASE NAME
CAUSE The file name or database name must be 1 to 6 characters starting with a
letter.
ACTION Reenter the command with the correct name.
MESSAGE INVALID DATA BASE NAME OR ACCESS FILE NAME
CAUSE The file name or database name must be 1 to 6 characters starting with a
letter.
ACTION Reenter the command with the correct name.
MESSAGE INVALID DB INTRINSIC CODE IN LOG RECORD CODE FIELD
CAUSE Internal error.
ACTION Contact your system manager.