MPE/iX Error Messages Manual Vol 3 (32650-90880)

224 Chapter5
Error Messages V iii C 4
Transaction Management
initiate a MUX card reset by running the host Termdsm to
restart the MUX card.
123 MESSAGE DTCMxxxxxxxx rom code download started for
DTC address yyyyyyyyyyyy (DTCMINFO123)
CAUSE This informational message indicates that a download
operation of the rom code for a DTC starts. For example :
The rom code download starts on a DTC IEEE802.3
address at 080009280E1C, the console message will be :
DTCMxxxxxxxx rom code download started for DTC
address 080009280E1C
ACTION Wait for the rom code download to complete. The rom code
download completion message will be shown on the
console.
125 MESSAGE DTCMxxxxxxxx rom code download aborted for
DTC address yyyyyyyyyyyy (DTCMERR125)
CAUSE This error message indicates that a download operation of
the rom code was aborted by the DTC. A problem occured
with the DTC while the download of the rom code was
being performed. For example : The download of the rom
code was aborted on the DTC IEEE802.3 address at
080009280E1C, the console message will be :
DTCMxxxxxxxx rom code download aborted for DTC
address 080009280E1C
ACTION The appropriate message with the corrective action will be
displayed for the error conditions.
126 MESSAGE DTCMxxxxxxxx rom code download completed for
DTC address yyyyyyyyyyyy (DTCMERR126)
CAUSE This informational message indicates that a download
operation of the rom code completes. For example : The
download of the rom code completed on a DTC IEEE802.3
address at 080009280E1C, the console message will be :
DTCMxxxxxxxx rom code download completed for DTC
address 080009280E1C
ACTION The rom code is downloaded to the DTC without any
problems, no actions need to be taken.
Transaction Management
(Subsystem 151)
101 MESSAGE An escape occurred when using MOVE_FAST.