MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 5 219
Error Messages V iii C 4
TermDSM
301 MESSAGE DTCM port data area not initialized. (TDSM
301)
CAUSE Internal error.
ACTION Contact your HP support representative.
302 MESSAGE Bad machine type found in RMP packet. (TDSM
302)
CAUSE Internal error.
ACTION Contact your HP support representative.
303 MESSAGE Non supported download file type found in RMP
packet. (TDSM 303)
CAUSE Internal error.
ACTION Contact your HP support representative.
304 MESSAGE Bad source IEEE 802.3 address found in RMP
packet. (TDSM 304)
CAUSE Internal error.
ACTION Contact your HP support representative.
305 MESSAGE Bad session ID found in RMP packet. (TDSM
305)
CAUSE Internal error.
ACTION Contact your HP support representative.
306 MESSAGE Bad path id received from NDM. (TDSM 306)
CAUSE Internal error.
ACTION Contact your HP support representative.
307 MESSAGE Boot (download) complete message received
before expected. (TDSM 307)
CAUSE It has finished the download of its operating firmware
before the DTCM expected it.
ACTION Look on the console for a boot complete message.
Otherwise, enter the command again. If the problem
persists, contact your HP support representative.
308 MESSAGE IO-get-frame failed. (TDSM 308)
CAUSE Internal error.
ACTION Contact your HP support representative.
309 MESSAGE Unimplemented action called. (TDSM 309)
CAUSE Internal error.
ACTION Contact your HP support representative.