MPE/iX Error Messages Manual Vol 3 (32650-90880)

210 Chapter5
Error Messages V iii C 4
TermDSM
ACTION Contact you HP support representative. You can obtain
additional information by running the card selftest
(through the SIC subcommand of the TermDSM RESET
command), the DTC selftest, and the DTC offline
diagnostics.
220 MESSAGE Parity error. Time = xx msec. (TDSM 220)
CAUSE Probable hardware failure.
ACTION Contact you HP support representative. You can obtain
additional information by running the card selftest
(through the SIC subcommand of the TermDSM RESET
command), the DTC selftest, and the DTC offline
diagnostics.
221 MESSAGE Hardware receive overrun. Time = xx msec.
(TDSM 221)
CAUSE Probable hardware failure.
ACTION Contact you HP support representative. You can obtain
additional information by running the card selftest
(through the SIC subcommand of the TermDSM RESET
command), the DTC selftest, and the DTC offline
diagnostics.
222 MESSAGE Framing error. Time = xx msec. (TDSM 222)
CAUSE Probable hardware failure.
ACTION Contact you HP support representative. You can obtain
additional information by running the card selftest
(through the SIC subcommand of the TermDSM RESET
command), the DTC selftest, and the DTC offline
diagnostics.
223 MESSAGE SIC Buffer overflow. Time = xx msec. (TDSM
223)
CAUSE Internal error.
ACTION Contact you HP support representative.
226 MESSAGE No record separator in Vplus. Time = xx msec.
(TDSM 226)
CAUSE Probable hardware failure.
ACTION Contact you HP support representative. You can obtain
additional information by running the card selftest
(through the SIC subcommand of the TermDSM RESET
command), the DTC selftest, and the DTC offline
diagnostics.
229 MESSAGE Read timeout (no data came back). Time = xx
msec. If external loopback, check loopback
hood. If terminal loopback, check