MPE/iX Error Messages Manual Vol 3 (32650-90880)

204 Chapter5
Error Messages V iii C 4
TermDSM
ACTION It is permissible for two or more users to run TermDSM
simultaneously as long as the users do not reference the
same DTC. In this case, message 35 will not appear. If one
TermDSM user chooses to override another by continuing,
it is likely that the overridden TermDSM will produce
error messages. This facility is provided for the case where
a terminal running TermDSM is hung and therefore
cannot exit the program. Note that if one TermDSM user
resets the port of another TermDSM user, this can cause
the system to go down.
36 MESSAGE No ldevs seem to be configured on your
system. (TDSM 356)
CAUSE Necessary configuration information does not exist on the
system.
ACTION Make sure the file NMCONFIG.PUB.SYS exists. Bring the
system down and back up again, making sure that the
proper SYSGEN files are used. (The SYSGEN files used
are determined by the boot path. The file
NMCONFIG.PUB.SYS is used automatically.)If the problem
persists, contact your HP support representative.
37 MESSAGE The dump process can't find out the length of
the data area. (TDSM 37)
CAUSE Internal error.
ACTION Contact your HP support representative.
38 MESSAGE The data area is longer than TermDSM's dump
buffer. (TDSM 38)
CAUSE Internal error.
ACTION Contact your HP support representative.
39 MESSAGE TermDSM never received a reply to its dump
data area request. (TDSM 39)
CAUSE Internal error.
ACTION Contact your HP support representative.
42 MESSAGE You must have high (1) security to perform
this function.
For level 1, you need SM or DI capability.
(TDSM 42)
CAUSE You do not have the correct user capabilities to use this
function.
ACTION Logon as a user with the correct capabilities for the
TermDSM functions you wish to use. Refer to the
reference documentation for the security levels of each
command and subcommand.