MPE/iX Error Messages Manual Vol 3 (32650-90880)

202 Chapter5
Error Messages V iii C 4
TermDSM
ACTION Enter a valid port number. Check the port number on the
back of the DTC if necessary.
19 MESSAGE The port number is missing or invalid. Port
numbers range from 0 to 7. (TDSM 19)
CAUSE The port number was not entered or is unrecognizable.
ACTION Enter a valid port number. Refer to the reference
documentation for syntax.
20 MESSAGE You have entered an incorrect ldev number.
Ldev numbers are positive integers. (TDSM 20)
CAUSE The value that you entered as a logical device number is
not a number greater than zero.
ACTION Enter a valid ldev number. Note that you can also use the
port subcommand.
21 MESSAGE The ldev number is missing or invalid. Ldev
numbers are positive integers. (TDSM 21)
CAUSE The logical device number was not entered or is
unrecognizable.
ACTION Enter a valid ldev number. Note that you can also use the
port subcommand.
22 MESSAGE You have entered an invalid SIC card number.
SIC card numbers range from 0 to 5. (TDSM 22)
CAUSE The card number that you entered in is not the range zero
to five.
ACTION Doublecheck the card numbers by looking at the back of
the DTC. Enter the card number again.
23 MESSAGE The SIC card number is missing or invalid.
SIC card numbers range from 0 to 5. (TDSM 23)
CAUSE The card number was not entered or is unrecognizable.
ACTION Enter the card number again. Refer to the prompt or to the
reference documentation for syntax.
24 MESSAGE You have entered an incorrect DTC number.
Please choose a DTC number from
this list. (TDSM 24)
CAUSE The value entered does not correspond with any DTC on
the system.
ACTION The DTCs on the system are listed with their numbers.
Enter one of the numbers displayed.
25 MESSAGE The DTC number is missing or invalid. Please
choose a DTC number from this list. (TDSM 25)
CAUSE The DTC number was not entered or is unrecognizable.