MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 4 195
Error Messages Viii C 3
System Logging
Volume cannot be updated, INSTALL is required.
345 MESSAGE System Abort 345
CAUSE Internal error. Invalid spare state. Debug code not
released.
ACTION Call your Hewlett-Packard Representative.
346 MESSAGE A failure was received from CREATE_OBJECT for
a semaphore to use to interlock the label.
CAUSE Error returned from CREATE_OBJECT for volume label
semaphore.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
347 MESSAGE A failure was received from
CREATE_BAD_SECTOR_TABLE.
CAUSE Error returned from CREATE_BAD_SECTOR_TABLE.
ACTION Determine cause of error from
CREATE_BAD_SECTOR_TABLE and correct.
348 MESSAGE A failure was received from XM_INITXM.
CAUSE Error from STARTGOLDENXID, transaction
management routine.
ACTION Determine cause of error from STARTGOLDENXID and
correct.
349 MESSAGE A failure was received from XM_INITXM.
CAUSE Error from ENDGOLDENXID, transaction management
routine.
ACTION Determine cause of error from ENDGOLDENXID and
correct.
System Logging
(Subsystem 206)
900 MESSAGE System logging is not enabled at the present
time.
CAUSE An attempt was made to log a record, switch the log file,
resume logging, show logging statistics or to shutdown the
logging while the logging facility was not enabled.
ACTION Enable the logging facility if desired.