MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 4 193
Error Messages Viii C 3
System Disk Load
ACTION Retry with a valid boot tape.
328 MESSAGE This is not an MPE/iX boot tape; MPE/iX label
bad.
CAUSE MPE/iX label check failed. Not a valid boot tape.
ACTION Retry with a valid boot tape.
330 MESSAGE An error was received from SENDIO writing
disk page 1.
CAUSE Error from LOAD_POST writing to sector zero and one of
LDEV 1. First write to sector zero and one of LDEV 1.
ACTION Determine cause of error from LOAD_POST and correct.
331 MESSAGE An error was received from CREATE_OBJECT for
first tape I/O buffer.
CAUSE Error returned from CREATE_OBJECT for tape I/O
buffer 1.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
332 MESSAGE An error was received from CREATE_OBJECT for
a second tape I/O buffer.
CAUSE Error returned from CREATE_OBJECT for tape I/O
buffer 2.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
333 MESSAGE An error was received from CREATE_OBJECT for
the tape LIF directory buffer.
CAUSE Error returned from CREATE_OBJECT for tape LIF
directory buffer.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
334 MESSAGE An error was received from CREATE_OBJECT for
the disk LIF directory buffer.
CAUSE Error returned from CREATE_OBJECT for disk LIF
directory buffer.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
335 MESSAGE An error was received from CREATE_OBJECT for
the tape LIF label buffer.
CAUSE Error returned from CREATE_OBJECT for tape LIF label
buffer.
ACTION Determine cause of error from CREATE_OBJECT and