MPE/iX Error Messages Manual Vol 3 (32650-90880)

190 Chapter4
Error Messages Viii C 3
System Disk Load
retry. Clean tape drive, remake tape and retry.
306 MESSAGE HPOPEN error occurred for DUMPAREA.
CAUSE Error returned from HPOPEN for create of
DUMPAREA.MPEXL.SYS.
ACTION Determine cause of error from HPOPEN and correct.
307 MESSAGE An error was received from FWRITE for
DUMPAREA.
CAUSE Condition code error returned by FWRITE for
DUMPAREA.MPEXL.SYS.
ACTION Determine cause of error from FCLOSE and correct.
308 MESSAGE Error from FCLOSE for DUMPAREA.
CAUSE Error from FCLOSE for DUMPAREA.MPEXL.SYS file.
ACTION Determine cause of error from FCLOSE and correct.
310 MESSAGE An error was received from HPOPEN for
creating boot file.
CAUSE Error returned from HPOPEN for create of a boot file.
ACTION Determine cause of error from HPOPEN and correct.
311 MESSAGE An error occurred on reading the tape boot
file block.
CAUSE Error returned from SENDIO for read file block from tape.
ACTION Determine cause of error from SENDIO and correct.
312 MESSAGE There was an error in the number of blocks on
the tape for the boot file; file length
error.
CAUSE User label numbers in tape file label are incorrect. Invalid
tape format. User labels are invalid for a boot file.
ACTION Determine cause of incorrect numbers and correct.
Remake tape and retry the UPDATE or INSTALL.
313 MESSAGE An error was received from FWRITE on the boot
file.
CAUSE EOF read from tape before expected while reading boot file
data. Invalid tape.Possible tape read error or tape position
error.
ACTION Determine cause of error and correct. Clean tape drive and
retry. Clean tape drive, remake tape and retry.
314 MESSAGE Failure posting page 1 to disk.
CAUSE Error from LOAD_POST writing to sector zero and one of
LDEV 1.