MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 4 183
Error Messages Viii C 3
System Disk Load
248 MESSAGE No IPL from the tape; disk will not boot.
CAUSE No IPL file was found on the tape. Invalid tape format.
ACTION Determine the cause of missing IPL file and correct.
Remake the tape and redo the UPDATE or INSTALL.
249 MESSAGE No NL.PUB.SYS from the tape; disk will not
start.
CAUSE No NL.PUB.SYS file was found on the tape. Invalid tape
format. File is identified by start number in tape file
header.
ACTION Determine the cause of missing NL.PUB.SYS file and
correct. Remake the tape and redo the UPDATE or
INSTALL.
250 MESSAGE An error was received from CREATE_OBJECT for
global area.
CAUSE Error returned from CREATE_OBJECT for global area.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
251 MESSAGE An error was received from CREATE_OBJECT for
page 1 buffer.
CAUSE Error returned from CREATE_OBJECT for page 1 buffer.
ACTION Determine cause of error from CREATE_OBJECT and
correct.
253 MESSAGE Bad sector table index error.
CAUSE An internal error occurred in the disk sparing routine
change sector state. Bad sector table index error.
ACTION Retry the function (INSTALL or UPDATE or START or
mount volume). Write over sector zero to bypass sparing
on this volume and initialize it again. Consult a
Hewlett-Packard System Engineer for help.
254 MESSAGE Error on read of TRACK TABLE from
RENDEZVOUSIO.
CAUSE Error returned from RENDEZVOUSIO for sparing read
track table.
ACTION Determine cause of error from RENDEZVOUSIO and
correct.
255 MESSAGE Error on read of TRACK TABLE from SENDIO.
CAUSE Error returned from SENDIO for sparing read track table.
ACTION Determine cause of error from SENDIO and correct.
256 MESSAGE Error on write of TRACK TABLE from