MPE/iX Error Messages Manual Vol 3 (32650-90880)

180 Chapter4
Error Messages Viii C 3
System Disk Load
CAUSE Error from FAKE_LOGON, file system directory routine.
ACTION Determine cause of error from FAKE_LOGON and correct.
226 MESSAGE A failure occurred from file system
FS_TDIRC_INIT.
CAUSE Error from FS_TDIRC_INIT, file system routine.
ACTION Determine cause of error from FS_TDIRC_INIT and
correct.
227 MESSAGE A failure occurred from local routine
LOAD_POST writing to sector 0,1 of disk.
CAUSE Error from LOAD_POST writing to sector zero and one of
LDEV 1.
ACTION Determine cause of error from LOAD_POST and correct.
228 MESSAGE A fatal option error occurred (file name
wrong); INSTALL renamed UPDATE.
CAUSE A copy of the PME INSTALL has been given control from
the option routine with the indication that the command
used to call the PME was not INSTALL. Probably was
UPDATE. Probably a copy of INSTALL was renamed
UPDATE.
ACTION Use a correct copy of INSTALL.
229 MESSAGE Disk sparing failed on LDEV 1.
CAUSE Error returned from disk sparing of LDEV 1.
ACTION Determine cause of error from sparing and correct.
230 MESSAGE REBOOT_CPU returned control.
CAUSE The routine REBOOT_CPU has returned control to the
caller. The CPU was probably not rebooted.
ACTION Determine why control was returned from REBOOT_CPU
and correct. Reboot the CPU and continue.
231 MESSAGE Hard loop failed, probably due to compiler or
hardware error, or START/NO START error.
CAUSE The compiler generated loop to stop the CPU on a nostart
option has exited. Generated code or hardware error.
ACTION Determine why the code exited and correct. Reboot the
CPU and continue.
232 MESSAGE An error occurred upon getting the size of
the disk.
CAUSE Error from GET_HPE_DISC_SIZE_PAGE. Internal
routine to compute the number of pages on the disk.
ACTION Determine cause of error from