MPE/iX Error Messages Manual Vol 3 (32650-90880)

178 Chapter4
Error Messages Viii C 3
System Disk Load
file data.
ACTION Clean tape drive and retry. Clean tape drive, remake tape
and retry. Determine cause of error from
RENDEZVOUSIO and correct.
210 MESSAGE An error occurred from I/O system reading the
name file from the tape from SENDIO.
CAUSE Error returned by SENDIO reading MPEXLDIR file data.
ACTION Determine cause of error from SENDIO and correct.
211 MESSAGE An error occurred reading the name file from
the tape; bad tape or wrong tape position;
not enough data read.
CAUSE Error in length of data reading MPEXLDIR file data. Tape
read expected at least 80 bytes and got less than 80 bytes.
ACTION Clean tape drive and retry. Clean tape drive, remake tape
and retry.
212 MESSAGE An error occurred from HPFOPEN to create the
name file.
CAUSE Error from HPFOPEN for MPEXLDIR file.
ACTION Determine cause of error from HPFOPEN and correct.
213 MESSAGE Error from FWRITE on writing name file.
CAUSE Error from FWRITE for MPEXLDIR file.
ACTION Determine cause of error from FWRITE and correct.
214 MESSAGE An error occurred from FCLOSE on the name
file.
CAUSE Error from FCLOSE for MPEXLDIR file.
ACTION Determine cause of error from FCLOSE and correct.
215 MESSAGE A failure occurred from INIT_BOOTCMD_AREA.
CAUSE Error from INIT_BOOTCMD_AREA.
ACTION Determine cause of error from INIT_BOOTCMD_AREA
and correct.
216 MESSAGE A failure occurred from SAVE_BOOTCMD_TO_DISK.
CAUSE Error from SAVE_BOOTCMD_TO_DISK.
ACTION Determine cause of error from
SAVE_BOOTCMD_TO_DISK and correct.
217 MESSAGE A failure occurred from COMPUTE_FREE_ADDRESS.
CAUSE Error from COMPUTE_FREE_ADDRESS.
ACTION Determine cause of error from