MPE/iX Error Messages Manual Vol 3 (32650-90880)

142 Chapter3
Error Messages Viii C 3
Process Manager
ACTION None.
15 MESSAGE The specified stack size is insufficient.
CAUSE Same as message content.
ACTION Respecify the stack size.
16 MESSAGE The loader failed to LOAD the program.
CAUSE Same as message content.
ACTION Debug the program.
17 MESSAGE An illegal priority class was specified.
CAUSE Same as message content.
ACTION Refer to the MPE/iX Intrinsics Reference Manual for legal
priority class.
18 MESSAGE The procedure failed to open STDIN.
CAUSE Same as message content.
ACTION Debug the program.
19 MESSAGE The procedure failed to open STDLIST.
CAUSE Same as message content.
ACTION Debug the program.
20 MESSAGE The missing ITEMNUM was passed to
CREATEPROCESS.
CAUSE Same as message content.
ACTION Refer to the MPE/iX Intrinsics Reference Manual.
21 MESSAGE Privileged mode capability is required.
CAUSE Same as message content.
ACTION Relink the program with PM capability.
40 MESSAGE An invalid action parameter was passed to
NOTIFICATION_LIST.
CAUSE Same as message content.
ACTION Debug the program.
50 MESSAGE There is no process which corresponds with
the specified PIN parameter.
CAUSE Same as message content.
ACTION Debug the program.
60 MESSAGE The specified process is not ALIVE.
CAUSE Same as message content.
ACTION None.