MPE/iX Error Messages Manual Vol 3 (32650-90880)

132 Chapter3
Error Messages Viii C 3
Port (IPC) Facility
990 MESSAGE A process blocked on a port WAIT (via a
receive port primitive) and requested to be
notified if a process interrupt occurred
before the block was satisfied. Signifies
that the process interrupt occurred first;
receive not satisfied.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
1000 MESSAGE An unexplained AWAKE of the calling process
from the WAIT queue has occurred.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
1010 MESSAGE The port primitive has not completed due to
the specified time out occurring first.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
1020 MESSAGE A nil pointer was used as a pointer to a
message pool.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
1030 MESSAGE Only local port numbers are expected to be
passed to this port primitive.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
1040 MESSAGE The port number passed into a port primitive
was the nil port number. The only primitive
that accepts this value is SEND_MSG.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
1050 MESSAGE The specified class for the semaphore to be
initialized is not within the valid range.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.