MPE/iX Error Messages Manual Vol 3 (32650-90880)

124 Chapter3
Error Messages Viii C 3
Port (IPC) Facility
Representative.
540 MESSAGE The specified port type is invalid, or the
access is inconsistent with the port's type.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
560 MESSAGE The specified server type is invalid, or the
access is inconsistent with the port's type
of server.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
580 MESSAGE Invalid or inconsistent specification in the
"SERVER_DESC" parameter to CREATE_PORT.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
590 MESSAGE An error was encountered from FINDLOCALITY.
This routine is called during port creation
for a port whose procedure server will
execute on the ICS, but whose server code is
not memory-resident.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
600 MESSAGE Either the maximum number of possible
subqueues has been exceeded, or the subqueue
specified exceeds the maximum configured for
the specified port.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
605 MESSAGE The specified info. item is not available to
access while on the ICS.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
610 MESSAGE It is illegal to access a port via a local
port number while on the ICS.
CAUSE Same as message content.