MPE/iX Error Messages Manual Vol 3 (32650-90880)

120 Chapter3
Error Messages Viii C 3
Port (IPC) Facility
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
261 MESSAGE Internal status was never returned to the
caller.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
262 MESSAGE Incompatible port access. Attempt to
FREEZE/UNFREEZE a port or change either of
the auxiliary data areas; the port descriptor
does not have a FREEZE descriptor. Attempt to
WAIT_ON_PORTS for port(s) that do not have
process servers.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
270 MESSAGE An attempt to ACCESS a port's message POOL
while on the ICS when the POOL was LOCKED in a
process environment (before control was
transferred to the ICS).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
280 MESSAGE The procedure attempted to access a
non-resident port that was also illegal to
access from the ICS. Note, that SEND requests
will be delayed (and not produce this error);
any other port primitive will result in this
error.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
285 MESSAGE A process was awoken from the WAIT queue, but
the reply message sent does not match that
which was expected (i.e., does not match the
information in the WAIT queue entry).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
300 MESSAGE When creating a port and specifying an