MPE/iX Error Messages Manual Vol 3 (32650-90880)

116 Chapter3
Error Messages Viii C 3
Port (IPC) Facility
124 MESSAGE The PFP class to associate the new port with
is invalid.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
125 MESSAGE The specified name for the PFP's port can not
be found in the port directory.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
126 MESSAGE An attempt to purge a PFP's port via
(PURGE_PORT); must use KILL_PFP.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
127 MESSAGE An attempt to associate a new port with a PFP
that is currently terminating.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
128 MESSAGE An error was encountered when attempting to
activate a new PFP process.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
129 MESSAGE The procedure attempted to kill one of the
standard (i.e., non-class 4) PFPs.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
130 MESSAGE An innternal error occurred - the initial
message sent to a PFP so that it can perform
its initialization is not of the proper
message format.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
131 MESSAGE An error was encountered when performing a
name look-up for a PFP port's name.