MPE/iX Error Messages Manual Vol 3 (32650-90880)

114 Chapter3
Error Messages Viii C 3
Port (IPC) Facility
the server type for the port is not a process
server.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
20 MESSAGE The procedure attempted to queue a message
frame (via a SEND primitive) to a port that
is already queued to a port (either this port
or some other port), or on the free list of a
message port.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
21 MESSAGE An attempt has been made to release a message
frame back to the message pool (via
REL_MSG_FRAME), but the frame is still queued
to a port (either this port or some other
port).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
30 MESSAGE The specified address, which must be a
message frame, is not a valid message frame
for the specified port.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
40 MESSAGE One or more of the specified parameters are
bad or inconsistent.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
50 MESSAGE The specified index for the wait queue entry
is not a valid index.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
105 MESSAGE The specified control item (for PORT_CONTROL)
is not available while executing on the ICS.
CAUSE Same as message content.