MPE/iX Error Messages Manual Vol 3 (32650-90880)
102 Chapter3
Error Messages Viii C 3
Native Mode Device File
-3 MESSAGE A return parameter to NMDF specifies an
address out of the user data
area.
-4 MESSAGE Information was requested on a native mode
device file that does not
exist.
-5 MESSAGE Get or Set_device_information could not
sm_open a device file.
-6 MESSAGE Get or Set_device_information was passed an
invalid device file
name.
-7 MESSAGE Get/set_device_information could not open a
device file.
-8 MESSAGE Get/set_device_information was asked for a
next device or class and no next device or
class exists.
-9 MESSAGE A reference parameter to get or
set_device_information specifies an address
out of the user data area.
-10 MESSAGE A non-existent device file name was passed to
get or set_device_information.
-11 MESSAGE Both device and class were specified to
get/set_device_information.
-12 MESSAGE No device or class was passsed to
get/set_device_information.
-13 MESSAGE A parameter to Get/set_device_information was
out of its valid range.
-14 MESSAGE Get or set_device_information was passed an
invalid device file name.
-15 MESSAGE Device specifier not passed to
get/set_device_information.
-16 MESSAGE No device or class was passsed to
get/set_device_information.
-17 MESSAGE An invalid kind of device specifier was
passed to get/set_device_information.
-18 MESSAGE In a call to Get/set_device_information,
caller requested to set an item that cannot
be set.
-19 MESSAGE A parameter to Get/set_device_information
asks for information that is incompatible
with the type of device/class specified.