MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 2 81
Native Mode Spooler
(Subsystem 236)
termination, could not notify the LDEV's
logical device manager.
9613 MESSAGE Output spooler, LDEV #\: Sequence error,
buffered data remains to be printed after the
printer connection has been released.
9614 MESSAGE Output spooler, LDEV #\: Unable to close
printer socket. The spooler will try to
continue with the present connection.
9615 MESSAGE Output spooler, LDEV #\: Error while waiting
for internal timed event to end.
9616 MESSAGE Output spooler, LDEV #\: Received an error at
line ! of NPCONFIG.PUB.SYS while retrieving
configuration information.
9617 MESSAGE Output spooler, LDEV #\: Failed to release
timer entry !.
9618 MESSAGE Output spooler, LDEV #\: Could not write
ending PJL
commands to printer.
9619 MESSAGE Output spooler, LDEV #\: File system error:
!!
9620 MESSAGE Output spooler, LDEV #\: The ! bytes of PJL
printer status exceed the ! bytes available
to hold it.
9621 MESSAGE Output spooler, LDEV #\: The PJL information
returned from the printer contains a syntax
error. The first ! (max) bytes are shown: !
9622 MESSAGE Output spooler, LDEV #\: Unable to deallocate
heap space used while processing NPCONFIG
items. The spooler will continue.
9623 MESSAGE Output spooler, LDEV #\: Unable to open
network printer configuration file
NPCONFIG.PUB.SYS.
9624 MESSAGE Output spooler, LDEV #\: Internal error,
NPCONFIG processing routines detected an LDEV
number outside the range of 1 to 10000000.
9625 MESSAGE Output spooler, LDEV #\: No entry for this
LDEV in NPCONFIG.PUB.SYS.
9626 MESSAGE Output spooler, LDEV #\: Syntax error in
NPCONFIG.PUB.SYS, missing LDEV specification.
9627 MESSAGE Output spooler, LDEV #\: Syntax error in
NPCONFIG.PUB.SYS, missing closing
parenthesis.