MPE/iX Error Messages Manual Vol 2 (32650-90879)

76 Chapter2
Native Mode Spooler
(Subsystem 236)
SUSPENDing. The spooler will attempt to
continue.
9554 MESSAGE Output spooler, LDEV #: The spooler received
a port read error.
9555 MESSAGE Output spooler, LDEV #: The spooler received
an invalid message type on its port.
9556 MESSAGE Output spooler, LDEV #: The spooler received
an unexpected escape during normal
processing.
9557 MESSAGE Output spooler, LDEV #: The spooler detected
a fatal condition while performing an
internal calculation. Please report the
spooling subsystem error number to your
support engineer.
9558 MESSAGE Output spooler, LDEV #: The spooler could not
access the Spooling Process Information Table
(SPIT).
9559 MESSAGE Output spooler, LDEV #: The spooler failed to
update the Spooling Process Information Table
(SPIT).
9560 MESSAGE Output spooler, LDEV #: Spoolfile internal
format error, attempted to access beyond file
bounds. The file will be deferred.
9561 MESSAGE Output spooler, LDEV #: Unsupported internal
function code "!". Legal values are 1-4 and
64-255.
9562 MESSAGE Output spooler, LDEV #: The device storage
manager reported an invalid device status
type "!". Please report the type and the
spooling subsystem error number to your
support engineer.
9563 MESSAGE Output spooler, LDEV #: The device reported a
parity or self-test error.
9564 MESSAGE Output spooler, LDEV #: The device has
insufficient memory to process data in this
file.
9565 MESSAGE Output spooler, LDEV #: The device has
reported 100 protocol errors while processing
this file.
9566 MESSAGE Output spooler, LDEV #: The device has
reported 100 instances of data overrun while
processing this file.