MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 12 491
Store/Restore (Native Mode) and TurboSTORE/iX III
(S/R) cont.
CAUSE Store could not close this file during abnormal
termination.
ACTION Call your support representative.
1619 MESSAGE FILE MAY BE INACCESSIBLE OR BECOME
INCONSISTANT IF ACCESSED
CAUSE Store could not close the file in a consistent state.
ACTION Call your support representative.
1620 MESSAGE ! COULD NOT BE RELEASED FROM STORE EXCLUSIVE
ACCESS (LAT)
CAUSE The file could not be released from global locking table.
ACTION Call your support representative.
1621 MESSAGE ! NOT STORED: ENCOUNTERED OPEN FAILURE ON
FILE
CAUSE Store locked the file but failed to open it.
ACTION Call your support representative.
1622 MESSAGE ! COULD NOT BE CLOSED DURING STORE OPERATION
CAUSE Store encountered an error trying to close the file.
ACTION Call your support representative.
1623 MESSAGE ! NOT PURGED: STORE COULD NOT GAIN OPEN
ACCESS TO THE FILE
CAUSE File security violation or file is in use.
ACTION Check your capabilities, file security and if file is in use.
1624 MESSAGE ! NOT PURGED: LOCKWORD VIOLATION ENCOUNTERED
ON FILE OPEN
CAUSE Incorrect lockword was supplied to FOPEN.
ACTION Retry with correct lockword.
1625 MESSAGE ! NOT PURGED: FILE IS PROBABLY IN USE SINCE
CLOSE FAILED
CAUSE File is opened by some other user.
ACTION Check if file is in use and retry.
1626 MESSAGE ! NOT FULLY STORED: DISC READ FAILURE
CAUSE Data could not be obtained from the disk.
ACTION Call your support representative.
1627 MESSAGE ! NOT FULLY STORED: INCOMPLETE DATA ON MEDIA
CAUSE Data could not be obtained from the disk.
ACTION Call your support representative.