MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 11 449
Store/Restore (Native Mode) and TurboSTORE/iX II
(S/R) cont.
POSITIVE INTEGER. SYSGEN/STORE INTERFACE
ERROR. (S/R 789)
CAUSE You did not include a valid number for the TIME option.
ACTION Check the syntax and enter a valid number for TIME
option.
791 MESSAGE WARNING: 'SYNTAX' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. SYSGEN/STORE INTERFACE ERROR. (S/R
791)
CAUSE The SYNTAX option was entered more than once.
ACTION Information only.
792 MESSAGE 'SYNTAX' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv. SYSGEN/STORE INTERFACE
ERROR. (S/R 792)
CAUSE SYNTAX and TRANSPORT options are not allowed on the
same command line.
ACTION TRANSPORT is not valid when creating combined
SLT/Store Set tape. Delete TRANSPORT option and
retype the command.
793 MESSAGE WARNING: 'NOLOCK' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. SYSGEN/STORE INTERFACE ERROR. (S/R
793)
CAUSE The NOLOCK option was entered more than once.
ACTION Information only, no action required.
794 MESSAGE 'NOLOCK' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv. SYSGEN/STORE INTERFACE
ERROR. (S/R 794)
CAUSE NOLOCK and TRANSPORT options are not allowed on
the same command line.
ACTION Delete either NOLOCK or TRANSPORT option and retype
the command.
795 MESSAGE 'NOLOCK' OPTION CANNOT BE USED WITH THE
'ONLINE' OPTION. SYSGEN/STORE INTERFACE
ERROR. (S/R 795)
CAUSE NOLOCK and ONLINE options are not allowed on the
same command line.
ACTION Delete either NOLOCK or ONLINE option and retype the
command.
796 MESSAGE 'NOLOCK' OPTION CANNOT BE USED WITH THE
'SPLITVS' OPTION. SYSGEN/STORE INTERFACE
ERROR. (S/R 796)