MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 11 441
Store/Restore (Native Mode) and TurboSTORE/iX II
(S/R) cont.
'DYNAMIC' OPTION (S/R 713)
CAUSE SPLITVS and DYNAMIC options are not allowed on the
same command line.
ACTION Delete either SPLITVS or DYNAMIC option and retype
the command.
721 MESSAGE 'MOSET' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv (S/R 721)
CAUSE MOSET and TRANSPORT options are not allowed on the
same command line.
ACTION CMSTORE and V/E caanot handle MOSET option. Delete
either MOSET or TRANSPORT option and retype the
command.
722 MESSAGE 'MOSET' OPTION HAS BEEN REDUNDANTLY SPECIFIED
(S/R 722)
CAUSE You specified MOSET option twice.
ACTION Delete one of the MOSET options and retype the
command.
723 MESSAGE 'MOSET' OPTION MAY NOT BE SPECIFIED IN
CONJUNCTION WITH A POSITIONAL DEVICE FILE.
Ex. 'STORE ....;*MO; MOSET=(MO1,MO2)' IS
INVALID (S/R 723)
CAUSE The name of the device in the form of *MO should not be
specified when using MOSET option.
ACTION Delete *MO from your command line and retype the
command.
724 MESSAGE EXPECTED '=(device[,,..])[,(device[,...])]'
AFTER 'MOSET' OPTION WHERE device IS A VALID
LDEV NUMBER OR A DEVICE NAME. SYNTAX
'MOSET=(device[,..])[,(device[,...])]' (S/R
724)
CAUSE You did not include a '=' sign after the MOSET option.
ACTION Retype the command line and include a '=' sign after the
MOSET option.
725 MESSAGE EXPECTED A '(' TO START A MOSET. Ex.
'MOSET=(MO1,MO2). SYNTAX
'MOSET=(device[,..])[,(device[,...])]' (S/R
725)
CAUSE You did not include a '(' to start a moset after the MOSET
option.
ACTION Retype the command and include a '(' in your command
line.