MPE/iX Error Messages Manual Vol 2 (32650-90879)

410 Chapter10
Store/Restore (Native Mode) and TurboSTORE/iX I
(S/R)
AFTER 'ONVS' OPTION. (S/R 373)
CAUSE You did not type the onvs parameter correctly.
ACTION Check the syntax and retype the command.
374 MESSAGE INVALID VOLUMESET NAME SPECIFIED FOR 'ONVS'
OPTION. VOLUMESET NAME MUST START WITH AN
ALPHA "A - Z' AND CONTAIN ONLY ALPHANUMERIC
"A-Z, 0-9", "_" AND "." SYNTAX
'ONVS=volumesetname[,volumesetname...]'.
(S/R 374)
CAUSE Volumeset name mispelled or not recognized on the
system.
ACTION Enter a system recognized volumeset name.
375 MESSAGE VOLUMESET NAME SPECIFIED FOR 'ONVS' OPTION
EXCEEDED THE MAXIMUM ALLOWABLE LENGTH OF 32
CHARACTERS. SYNTAX
'ONVS=volumesetname[,volumesetname...]'.
(S/R 375)
CAUSE You entered a volumeset name that was more than 32
characters.
ACTION Enter a volumeset name that has 32 characters or less.
376 MESSAGE EXPECTED 'volumesetname[,volumesetname...]'
AFTER 'ONVS=' WHERE volumesetname IS THE NAME
OF THE VOLUME SET THAT IS CURRENTLY ON YOUR
SYSTEM. SYNTAX
'ONVS=volumesetname[,volumesetname...]'.
(S/R 376)
CAUSE You did not type onvs parameter correctly.
ACTION Check the syntax and retype the command.
377 MESSAGE STORE/RESTORE DOES NOT ALLOW MORE THAN TWENTY
(20) "volumesetnames" TO BE SPECIFIED FOR THE
'ONVS' OPTION. (S/R 377)
CAUSE You specify too many volumeset name with the onvs
option. the maximum is 20.
ACTION Specify 20 or fewer volumesets.
378 MESSAGE "volumesetname" SPECIFIED DOES NOT EXIST (IS
NOT MOUNTED) ON THIS SYSTEM. (S/R 378)
CAUSE You entered a volumeset name which is not on the system.
ACTION Enter a correct volumeset name.