MPE/iX Error Messages Manual Vol 2 (32650-90879)

404 Chapter10
Store/Restore (Native Mode) and TurboSTORE/iX I
(S/R)
data. If this is reported by RESTORE, the RESTORE will
abort, since RESTORE cannot recover from a device
powerfail.
225 MESSAGE STORE/RESTORE ENCOUNTERED A POWERFAIL ON
REMOTE DEVICE FILE "!"
CAUSE A powerfail or bus reset occurred on the specified remove
device
ACTION If this was reported from STORE, STORE will
automatically rewind the current media and rewrite the
data. If this is reported by RESTORE, the RESTORE will
abort, since RESTORE cannot recover from a device
powerfail.
227 MESSAGE STORE/RESTORE LOST TAPE TENSION ON LDEV !
CAUSE While accessing a device, a tape tension lost condition was
reported.
ACTION STORE try to recover from this situation by rewinding the
current media and rewriting the reel. RESTORE cannot
recover from such a situation and will abort. Make sure
your tape devices are clean.
228 MESSAGE STORE/RESTORE LOST TAPE TENSION ON REMOTE
DEVICE FILE "!"
CAUSE While accessing a remote device, a tape tension lost
condition was reported.
ACTION STORE try to recover from this situation by rewinding the
current media and rewriting the reel. RESTORE cannot
recover from such a situation and will abort. Make sure
your tape devices are clean.
301 MESSAGE WARNING: 'FILES' OPTION HAS BEEN REDUNDANTLY
SPECIFIED (S/R 301)
CAUSE The FILES option was entered more than once.
ACTION Information only.
302 MESSAGE EXPECTED '={maxfiles}' AFTER 'FILES' OPTION.
SYNTAX
'FILES={maxfiles}' (S/R 302)
CAUSE You did not type the files parameter correctly.
ACTION Check the syntax and retype the command.
303 MESSAGE SPECIFIED MAXFILES VALUE FOR
'FILES={maxfiles}' EXCEEDS THE MAXIMUM
ALLOWED. (S/R 303)
CAUSE The maximum files limit of the files parameter has been