MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 9 367
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
configuration changes until they are kept to the
permanent configuration data file. Here, SYSGEN cannot
update a temporary file. The program dies.
ACTION Refer to the file system error for action to take.
0027 MESSAGE configuration changes are not kept yet!
CAUSE You try to exit a configurator without holding or clearing
the changes with the HOLD or CLEAR command, or you try
to exit the SYSGEN GLOBAL module without keeping the
changes. You are given an additional chance to hold or
keep the changes.
ACTION If in one of the four configurators, answer either no, hold
the changes, and then exit, or answer yes and abandon the
changes.
0028 MESSAGE still want to exit (yes/no)?
CAUSE Continuation of previous message.
ACTION Same as previous message.
0030 MESSAGE **error** illegal group name
CAUSE The group name entered is not valid.
ACTION Check the name you have entered and how it is specified.
If necessary, use the HELP command to list the command
syntax and check the parameter requirement.
0035 MESSAGE **error** illegal filename
CAUSE The file name or fully qualified file name is not valid for
the operation.
ACTION Enter a valid file for the operation.
0037 MESSAGE **error** can't create configuration file !
CAUSE SYSGEN, for whatever reason, cannot create the specified
configuration data file in the specified configuration group.
ACTION check permissions, see if the file is being access.
0041 MESSAGE **error** can't purge configuration file !
CAUSE SYSGEN, for whatever reason, cannot purge the specified
configuration data file in the specified configuration group.
ACTION
0042 MESSAGE **error** can't save configuration file !
CAUSE SYSGEN, for whatever reason, cannot save the specified
configuration data file in the specified configuration group.
ACTION
0050 MESSAGE **error** can't find filename