MPE/iX Error Messages Manual Vol 2 (32650-90879)

366 Chapter9
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
CAUSE This message occurs when you try to build a tape with too
many boot images. Only 63 total files are accepted by the
LIF directory.
ACTION Delete boot images necessary to generate the tape.
1045 MESSAGE **error** No tape made due to previous errors
1046 MESSAGE **error** No keep done due to previous errors
Service (SERVE) Messages
0001 MESSAGE **error** invalid command
CAUSE The command you have entered is not valid for the
configurator or GLOBAL module, or you have entered
parameter values without the command or command
abbreviation.
ACTION Enter HELP without a parameter to list all configurator or
global module commands. check how you have specified
your command.
0004 MESSAGE **error** can't create temporary
configuration file --!
CAUSE For whatever reason, SYSGEN cannot create the
referenced temporary configuration file. Program dies.
ACTION If the file is IOLDEVP, it could be the available disk space
does not provide enough room for another configuration.
check available disk space with the DISCFREE command.
Refer to the file system error for other action to take.
0005 MESSAGE **error** can't open configuration file --!
CAUSE For whatever reason, SYSGEN cannot create the
referenced configuration file. Program dies.
ACTION If the file is IOLDEVP, it could be that the available disk
space does not provide enough room for another
configuration. check available disk space with the
DISCFREE command. Refer to the file system error for
other action to take.
0016 MESSAGE **error** invalid parameter
CAUSE The keyword parameter used in the command is not valid.
ACTION Use the HELP command to display the command syntax.
0019 MESSAGE **error** fail to initalize primary
configuration file.
0025 MESSAGE **error** can't update temporary
configuration file
CAUSE SYSGEN uses temporary files to store current