MPE/iX Error Messages Manual Vol 2 (32650-90879)

362 Chapter9
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
1044 MESSAGE **error** all start versions are in use
1045 MESSAGE **error** nmlib version ! is already in use
1050 MESSAGE **error** parameter name is too long
1051 MESSAGE **error** Can't delete !. Delete the boot
file instead.
1052 MESSAGE **error** Can't find start's library
(shouldn't happen!)
1053 MESSAGE **error** The image you replace must be an
IPL image
1054 MESSAGE **error** There's already a ! file
CAUSE Can only have one.
1055 MESSAGE **error** Only ! tape boot files are allowed.
CAUSE Only ! fits in directory ISL uses.
1056 MESSAGE **error** Only ! disc boot files are allowed.
CAUSE Only ! fits in directory ISL uses.
1058 MESSAGE **error** Only ! system files are allowed.
1060 MESSAGE **error** Only the factory can ABOOT IPL
files.
1061 MESSAGE **error** Couldn't find any files of mode !
Outerblock Messages
0080 MESSAGE ** configuration files not saved **
CAUSE This message occurs when you abort a KEEP by not
purging previous files, when an error occurs that does not
allow SYSGEN to save the new configuration information,
or when a TAPE generation fails.
ACTION None. Information only.
0081 MESSAGE ** configuration files successfully saved **
CAUSE This message occurs when a KEEP operation is successful.
ACTION None. Information only.
0082 MESSAGE ** successful execution **
CAUSE This message occurs when the TAPE command execution is
successful.
ACTION None. Information only.
0083 MESSAGE ** group "!" is created **
CAUSE This message occurs when SYSGEN created a new
configuration group (referenced by name) in the SYS