MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 9 353
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
reserved its usage for a special purpose.
ACTION Reenter the command with another name for the class.
1159 MESSAGE **error** Class ! is reserved and cannot be
deleted
CAUSE You have attempted to delete a class that the system has
reserved for its special purpose.
ACTION None.
1160 MESSAGE **error** Class ! is reserved and cannot be
changed
CAUSE You have attempted to modify a class that the system has
reserved for its own special purpose.
ACTION None.
1161 MESSAGE **error** Can't create class ! with mode
!--class not added
CAUSE You have attempted to create a class with an inconsistent
mode. SYSGEN does not accept the class operation.
ACTION Review the conflict and reenter the command with the
proper mode.
1162 MESSAGE **error** ldev ! does not exist
CAUSE You have attempted to add an LDEV to this class that does
not exist.
ACTION Reenter command with a proper LDEV number.
1163 MESSAGE **error** class file or DCC mode bad--mode is
!
CAUSE SYSGEN's class file is in conflict with NMMGR's
configuration file. The displayed mode is in question.
ACTION Contact software personnel responsible for updating and
maintaining these configuration files.
1164 MESSAGE **error** Can't remove class ! from device !
CAUSE You are attempting to delete a class from a device, that
could cause the system not to be able properly determine
its function.
ACTION Contact software personnel responsible for updating and
maintaining this file.
1165 MESSAGE **error** mpe type only configurable for USER
devices
CAUSE These device types are only associated with the 'classic'
16-bit HP 3000 systems and are honored only to support
those programs ported over from those systems.Therefore,