MPE/iX Error Messages Manual Vol 2 (32650-90879)

352 Chapter9
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
1147 MESSAGE **error** Can't change to id=!
CAUSE You cannot change the ID to this value. Most often USER.
ACTION Reenter command with proper ID= parameter.
1150 MESSAGE **error** Can't seek to beginning of ioclass
file
CAUSE SYSGEN encountered an internal system error in
attempting to initialize the ioclass configuration file for
processing.
ACTION Contact the software personnel responsible for updating
and maintaining these files.
1153 MESSAGE **error** Couldn't determine appropriate
class mode for ldev !
CAUSE SYSGEN has encountered an internal system error in
attempting to obtain the class and mode from the ioclass
configuration file.
ACTION Contact the software personnel responsible for updating
and maintaining these files.
1154 MESSAGE **error** Class ! can't accept ldev
!--incompatible modes
CAUSE You have attempted to include a device whose mode is
incompatible with the other devices in this class.
ACTION Reenter the command without the device under question.
1155 MESSAGE **error** Class ! can't accept mode !
CAUSE You have attempted to add a mode that is incompatible
with some or all the devices in this class.
ACTION Review the conflict and reenter the command with the
proper MODE= parameter.
1156 MESSAGE **error** Too many devices in class !--device
not added
CAUSE A device class can only hold so many devices--currently
255.
ACTION Remove other devices from class, or create a new class.
1157 MESSAGE **error** class info is corrupt (class !)
CAUSE The records of the IOCLASS configuration file, that
contains the information for this LDEV, is corrupted.
ACTION Contact the software personnel responsible for updating
and maintaining these files.
1158 MESSAGE **error** Class VTERM is reserved
CAUSE You cannot assign this name to a class. The system has