MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 9 351
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
ACTION See the volume configuration corruption message.
1140 MESSAGE **error** Ldev configuration is corrupted!
CAUSE The permanent configuration data file IOLDEV is
corrupted. The problem is the record size, that was
probably assigned through the previous configuration
change or through an improper addition to
IODFAULT.PUB.SYS.
ACTION Contact the software personnel responsible for updating
and maintaining these files.
1141 MESSAGE rsize ! is invalid
CAUSE This message, following the LDEV configuration
corruption gives the record size in question.
ACTION Go back to a known good configuration. If the problem
recurs, contact SE.
1142 MESSAGE **error** Path configuration is corrupted!
CAUSE The permanent configuration data file IOPATH contains an
error as displayed. The error occurs from the previous
configuration KEEP or through an improper addition to
IODFAULT.PUB.SYS. Specific details are in additional
messages.
ACTION Contact the software personnel responsible for updating
and maintaining these files.
1143 MESSAGE physical manager priority of ! is invalid
CAUSE This message gives the physical manager's priority, that is
being questioned.
ACTION See the path configuration corruption message above.
1144 MESSAGE ! max. expected concurrent I/Os is invalid
CAUSE This message gives the maximum number of concurrent
I/Os, that is being questioned.
ACTION See the path configuration corruption message above.
1145 MESSAGE **error** Class configuration is corrupted!
CAUSE The number of DCC devices field has been corrupted in
IOCLASSP.
ACTION Go back to a known good configuration. If problem recurs,
contact SE.
1146 MESSAGE **error** USER device requires all
parameters!
CAUSE You have omitted one or more parameters.
ACTION Reenter command with all parameters.