MPE/iX Error Messages Manual Vol 2 (32650-90879)

350 Chapter9
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
iopath structure in proper level sequence.
1133 MESSAGE **error** can't delete NMMGR paths from
SYSGEN
CAUSE An NMMGR path, once defined through NMMGR and set
through the SYSFILE RDCC command, cannot be deleted
through the I/O configurator DPATH command.
ACTION None.
1134 MESSAGE **error** can't change NMMGR paths from
SYSGEN
CAUSE An NMMGR path, once defined through NMMGR and set
through the SYSFILE RDCC command, cannot be modified
through the I/O configurator MPATH command.
ACTION None.
1135 MESSAGE NMMGR path ! is incomplete
CAUSE Usually, this is caused by setting an improper file as the
remote configuration file through the SYSGEN
configurator RDCC command. Currently,themessagereads
NMMGR path 9.0 is incomplete.
ACTION Through RDCC, designate a valid remote configuration
file.
1136 MESSAGE **error** Volume configuration is corrupted!
CAUSE The permanent configuration data file IOVOLP contains an
error as displayed. The error occurs from the previous
configuration KEEP or through an improper addition to
IODFAULT.PUB.SYS. Specific details are in subsequent
messages.
ACTION Contact the software personnel responsible for updating
and maintaining these files.
1137 MESSAGE ldev ! is invalid
CAUSE This message furnishes the LDEV identity of the previous
volume configuration corruption message.
ACTION See the volume configuration corruption message.
1138 MESSAGE !% transient is invalid
CAUSE This message gives the transient percentage of the
previous volume configuration corruption message.
ACTION See the volume configuration corruption message.
1139 MESSAGE !% permanent is invalid
CAUSE This message gives the permanent percentage of the
previous volume configuration corruption message.