MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 9 345
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
1081 MESSAGE **error** ldev ! is already configured as the
system
master volume
CAUSE You are attempting to add a device with an LDEV that has
already been configured as the system master volume.
ACTION Assign the device to another LDEV.
1082 MESSAGE **error** can't delete the system master
volume
CAUSE You are attempting to delete the system master volume
that is not allowed.
ACTION Reenter the command, if you want to delete a device other
than the system master volume or any other system
member volume (MEMBERx), without referencing a
configured system's LDEV, product identification, or class.
1083 MESSAGE **error** can't modify this parameter of the
system
master volume
CAUSE You are attempting to modify a parameter of the system
master volume's identification and control elements that is
fixed and protected by the system.
ACTION Reenter the command if you wish to modify a nonprotected
parameter.
1087 MESSAGE **error** this path has an associated ldev
CAUSE This message occurs when the iopath you attempt to
delete or modify has a configured device or a sublevel
contains a device that would be deleted.
ACTION Use the LPATH command and LEVEL= parameter to list
paths and associated devices. Base your action on the
information.
1188 MESSAGE **error** Can't read from default file
CAUSE SYSGEN, for whatever reason, cannot read the default
configuration file IODFAULT.PUB.SYS. Program dies.
ACTION Refer to the file system error for action to take.
1090 MESSAGE **error** outdev is too long
CAUSE This message appears when you enter a value that is too
long for the OUTDEV= parameter, or one that has been
added to IODFAULT.PUB.SYS.
ACTION Enter a new value of acceptable length. Contact the
softwarepersonnel responsible for maintaining the system
file.
1091 MESSAGE **error** manager name is too long