MPE/iX Error Messages Manual Vol 2 (32650-90879)

340 Chapter9
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
ACTION Enter the LCLASS command to verify that the class exists
and to verify that LDEVs are associated with the class
name. If you were adding a class prior to adding a device,
use the ADEV command to add thedevice and enter a name
in the CLASS= parameter to associate the device with a
class name (other than the system default).
1001 MESSAGE **error** classname does not exist
CAUSE You are trying to delete or modify a class name that does
not exist.
ACTION Use the LCLASS command to display existing class names
and associated devices.
1002 MESSAGE **error** new volume name already exists
CAUSE The volume name you are adding through the AVOL
command or the name you designate as the new volume
name through the MVOL command already exists.
ACTION Use the LVOL command to view existing volume names.
Choose an unused volume name.
1003 MESSAGE **error** can't read I/O volume configuration
file
CAUSE SYSGEN cannot read the configuration data file IOVOLP.
The program terminates.
ACTION Refer to the file system error for action to take.
1004 MESSAGE **error** can't modify I/O volume
configuration
CAUSE SYSGEN cannot read the configuration data file IOVOLP.
The program terminates.
ACTION Refer to the file system error for action to take.
1005 MESSAGE **error** volume name does not exist
CAUSE The volume name you try to list, modify or delete as the
name designed in the volume parameter of the LVOL,
MVOL, or DVOL command does not exist.
ACTION Use the LVOL command without a parameter to display all
existing volume names. Choose an existing name for the
modify or delete operation.
1006 MESSAGE **error** can't add volume to I/O
configuration
CAUSE SYSGEN cannot write the configuration data file IOVOLP.
The program terminates.
ACTION Refer to the file system error for action to take.
1007 MESSAGE **error** ldev ! is reserved for system