MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 9 325
System Startup, Shutdown, and Configuration (cont)
Class Errors
characters. (I)
CAUSE The command or utility entered at the ISL prompt exceeds
10 characters in length.
ACTION Reenter the command or utility name.
CE10 MESSAGE Internal inconsistency: volume label - FATAL!
(E)
CAUSE ISL cannot read the volume label.
ACTION Contact your Hewlett-Packard Support Representative.
Boot the system from the alternate path. Initiate tape
dump if possible. Update the system from the system boot
tape.
CE11 MESSAGE Internal inconsistency: directory - FATAL!
(E)
CAUSE ISL cannot read the Directory.
ACTION Boot from the alternate path. Update system files from
system boot tape. Contact your Hewlett-Packard Support
Representative.
CE12 MESSAGE Error reading auto-execute file. (W)
CAUSE ISL cannot read the auto-execute file.
ACTION Enter the ISL utility command and options at the ISL
prompt.
CE13 MESSAGE Error reading from the system console -
FATAL! (E)
CAUSE Firmware, hardware, or device error possible.
ACTION enable remote console from the console CM> prompt, if
possible. Soft reset the system, initiate DUMP START.
Contact your Hewlett-Packard Support Representative.
CE14 MESSAGE Error writing to the system console - FATAL!
(E)
CAUSE Firmware, hardware, or device error possible.
ACTION enable remote console from the console CM> prompt, if
possible. Soft reset the system, initiate DUMP START.
Contact your Hewlett-Packard Support Representative.
CE15 MESSAGE Not an ISL command or utility. (W)
CAUSE The entry at the ISL prompt is neither an ISL utility nor
command name.
ACTION Enter a proper ISL utility or command name.
CE16 MESSAGE Utility file header inconsistent: Invalid
system ID. (W)