MPE/iX Error Messages Manual Vol 2 (32650-90879)

324 Chapter9
System Startup, Shutdown, and Configuration (cont)
Class Errors
command file.
ACTION None.
CE02 MESSAGE Cannot find auto-execute file. Autoboot
aborted. (I)
CAUSE An auto-execute file does not exist or the file has not been
properly designated through the SYSGEN utility
SYSFILE configurator.
ACTION Enter boot sequence command and options to the ISL
prompt. (If file exists, refer to MPE/iX System Startup,
Configuration, and Shutdown Reference Manual for
information on how to configure the file as an auto-execute
file.)
CE03 MESSAGE No System console found. ISL can only
autoboot. (I)
CAUSE A system console does not exist or is disabled. ISL
attempts to bring up the system with no operator
intervention.
ACTION None.
CE05 MESSAGE Directory of utilities is too big. ISL reads
only 2K bytes. (I)
CAUSE Directory entries exceed 2 KB.
ACTION None.
CE06 MESSAGE Auto-execute file is inconsistent. Autoboot
aborted. (I)
CAUSE Commands within the file are in conflict or are invalid for
the startup sequence.
ACTION Enter the startup sequence command and options at the
ISL prompt.
CE07 MESSAGE Utility file header inconsistent: SOM values
invalid. (I)
CAUSE ISL cannot read the header information.
ACTION None.
CE08 MESSAGE Auto-execute file input string exceeds 2048
characters. Autoboot aborted. (I)
CAUSE A command line string that has more than 2048
characters has been entered as part of the command file.
ACTION Enter the startup sequence command and options at the
ISL prompt. Edit the auto-execute file and reassign it
through the SYSGEN utility for subsequent autoboot.
CE09 MESSAGE ISL command or utility name exceeds 10