MPE/iX Error Messages Manual Vol 2 (32650-90879)

306 Chapter8
System Startup, Shutdown, and Configuration
Class Errors
06 MESSAGE No message. System halts. (E)
CAUSE Memory controller cannot calculate the address of the
faulty memory. Second possible cause of the error is the
cache unit.
ACTION Contact your Hewlett-Packard Support Representative.
07 MESSAGE No message. System halts. (E)
CAUSE Single bit error is detected. Second possible cause of the
error is the cache unit.
ACTION Contact your Hewlett-Packard Support Representative.
0A MESSAGE No message. System halts. (E)
CAUSE Parity checking/generator is not working. Second possible
cause of the error is the cache unit.
ACTION Contact your Hewlett-Packard Support Representative.
0B MESSAGE No message. System halts. (E)
CAUSE Verification of read/write protocol fails. Second possible
cause of the error is the cache unit.
ACTION Contact your Hewlett-Packard Support Representative.
0C MESSAGE No message. System halts. (E)
CAUSE Verification of read and Clear protocol fails. Second
possible cause of the error is the cache unit.
ACTION Contact your Hewlett-Packard Support Representative.
10 MESSAGE No message. System halts. (E)
CAUSE Undefined type of memory controller is found.
ACTION Contact your Hewlett-Packard Support Representative.
11 MESSAGE No message. System halts. (E)
CAUSE Error occurs as "hole" in memory is detected.
ACTION Install 32 MB memory controller. Contact your
Hewlett-Packard Support Representative.
12 MESSAGE No message. System halts. (E)
CAUSE Last memory controller does not have a memory array
installed.
ACTION Contact your Hewlett-Packard Support Representative.
Install memory array.
13 MESSAGE No message. System halts. (E)
CAUSE Last 8 MB (3 MB MC and 5 MB MA) memory controller
does not have a memory array installed.
ACTION Contact your Hewlett-Packard Support Representative.