MPE/iX Error Messages Manual Vol 2 (32650-90879)

284 Chapter8
System Startup, Shutdown, and Configuration
Class Errors
ACTION Contact your Hewlett-Packard Support Representative.
3D MESSAGE No message. System halts. (E)
CAUSE Unimplemented trap occurs. Second possible cause of the
error is the register file. Third possible cause of the error is
the TLB.
ACTION Contact your Hewlett-Packard Support Representative.
40 MESSAGE No message. System halts. (E)
CAUSE Verification of the transfer of control/soft reset fails.
ACTION Contact your Hewlett-Packard Support Representative.
41 MESSAGE No message. System halts. (E)
CAUSE Unexpected high-priority machine check is found during
forced TOC/soft reset.
ACTION Contact your Hewlett-Packard Support Representative.
42 MESSAGE No message. System halts. (E)
CAUSE Cannot verify PCQ front after RFI with Q bit off.
ACTION Contact your Hewlett-Packard Support Representative.
43 MESSAGE No message. System halts. (E)
CAUSE Cannot verify Assist Emulation trap, or cannot verify bit
zero of CCR.
ACTION Contact your Hewlett-Packard Support Representative.
44 MESSAGE No message. System halts. (E)
CAUSE Cannot verify coprocessor configuration register by forcing
assist emulation trap.
ACTION Contact your Hewlett-Packard Support Representative.
45 MESSAGE No message. System halts. (E)
CAUSE Cannot verify overflow trap with ADDIO instruction.
ACTION Contact your Hewlett-Packard Support Representative.
46 MESSAGE No message. System halts. (E)
CAUSE Unexpected overflow trap occurs.
ACTION Contact your Hewlett-Packard Support Representative.
47 MESSAGE No message. System halts. (E)
CAUSE Cannot verify index other than zero with BLR instruction.
ACTION Contact your Hewlett-Packard Support Representative.
48 MESSAGE No message. System halts. (E)
CAUSE Cannot verify index other than zero with BV instruction.