MPE/iX Error Messages Manual Vol 2 (32650-90879)

280 Chapter8
System Startup, Shutdown, and Configuration
Class Errors
ACTION Contact your Hewlett-Packard Support Representative.
0B MESSAGE No message. System halts. (E)
CAUSE Verification of the coprocessor fails. Second possible cause
of the error is the execution unit.
ACTION Contact your Hewlett-Packard Support Representative.
0C MESSAGE No message. System halts. (E)
CAUSE Verification of the interrupt vector address or PC offset
queue fails. Second possible cause of the error is the
execution unit.
ACTION Contact your Hewlett-Packard Support Representative.
0D MESSAGE No message. System halts. (E)
CAUSE Verification of the interrupt processor status word fails.
Second possible cause of the error is the execution unit.
ACTION Contact your Hewlett-Packard Support Representative.
0E MESSAGE No message. System halts. (E)
CAUSE Verification of the PC offset queue operation fails. (Cannot
verify the functionality of the PSW Q bit.) Second possible
cause of the error is the translation look-aside buffer.
ACTION Contact your Hewlett-Packard Support Representative.
0F MESSAGE No message. System halts. (E)
CAUSE Instruction unit cannot force trap. Second possible cause
of the error is the register file unit.
ACTION Contact your Hewlett-Packard Support Representative.
16 MESSAGE No message. System halts. (E)
CAUSE PC offset queue does not hold the correct address after
trap.
ACTION Contact your Hewlett-Packard Support Representative.
17 MESSAGE No message. System halts. (E)
CAUSE IPSW does not receive the value of the PSW after trap.
ACTION Contact your Hewlett-Packard Support Representative.
18 MESSAGE No message. System halts. (E)
CAUSE Interrupt instruction register does not receive the value of
the instruction that causes a trap.
ACTION Contact your Hewlett-Packard Support Representative.
19 MESSAGE No message. System halts. (E)
CAUSE Verification of the forced break instruction trap fails.