MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 8 277
System Startup, Shutdown, and Configuration
Class Errors
ACTION Contact your Hewlett-Packard Support Representative.
0B MESSAGE No message. System halts. (E)
CAUSE Test of the unit conditions fails.
ACTION Contact your Hewlett-Packard Support Representative.
0C MESSAGE No message. System halts. (E)
CAUSE Test of the extract/logical conditions fails.
ACTION Contact your Hewlett-Packard Support Representative.
0D MESSAGE No message. System halts. (E)
CAUSE Test of the PSW C/B bit fails. Second cause of the error
may be the register file.
ACTION Contact your Hewlett-Packard Support Representative.
10 MESSAGE No message. System halts. (E)
CAUSE Verification of the shift and add conditions fails.
ACTION Contact your Hewlett-Packard Support Representative.
11 MESSAGE No message. System halts. (E)
CAUSE Cannot verify shift one and add.
ACTION Contact your Hewlett-Packard Support Representative.
12 MESSAGE No message. System halts. (E)
CAUSE Cannot verify shift two and add.
ACTION Contact your Hewlett-Packard Support Representative.
13 MESSAGE No message. System halts. (E)
CAUSE Cannot verify shift three and add.
ACTION Contact your Hewlett-Packard Support Representative.
14 MESSAGE No message. System halts. (E)
CAUSE Verification of the load byte short with odd index fails.
ACTION Contact your Hewlett-Packard Support Representative.
15 MESSAGE No message. System halts. (E)
CAUSE Verification of the operation of the PSW's C/B bits with
decimal correct (DCOR) instruction fails.
ACTION Contact your Hewlett-Packard Support Representative.
16 MESSAGE No message. System halts. (E)
CAUSE Verification of the PSW's C/B bits with logical shift
operation fails. (C/B gets updated.)
ACTION Contact your Hewlett-Packard Support Representative.
17 MESSAGE No message. System halts. (E)