MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 8 269
System Startup, Shutdown, and Configuration
Reading the Message and Code Display
Categories of "nonclass" errors appear on the following page.
Interpreting "Nonclass" Errors
Besides class errors, the system console also displays the following types of errors:
• Run-time codes
• DCC error
• High priority machine check (HPMC) detailed errors (XXF0-XXFF)
• Log file errors
• SYSGEN messages (I/O, MISC, LOG, SYSFILE)
• Outerblock messages
• SERVE messages
• Other messages
• Scanner messages
• Boot tape messages
• LANGINST messages
* Multiprocessor errors
These error messages appear after the class errors in this chapter, in the same order
shown in the list above. If unlisted errors occur, call your Hewlett-Packard support
representative.
5 5sxx Bus protocol error.
6 Reserved.
7 7sxx Faulty memory.
8 8sxx Faulty I/O card.
9 01xx and
9xxx
Console test error.
A 01xx and
Axxx
Boot device error.
B Bxxx Operating system software error.
C Initialization messages.
CA CAxx Power fail.
CB CBxx Transfer of control.
CE CExx ISL messages and error codes.
Table 8-1. Class Error Descriptions
Err. Code Description